Welcome to Anhui Tiankang mechanical and Electrical Equipment Co., Ltd!
    Chinese |English |Sitemap|18019899982
14137929383146.jpg

Silicone rubber control cable

A: product characteristics and uses: This product
  • Tel:18019899982
  • Fax:0550-7989666
  • Mail:tkjd@tiankang.com
Description

A: product characteristics and uses: This product is suitable for AC transmission lines with fixed voltage 0.6/1KV or below, and the connecting cables for power transmission lines or mobile electric appliances. The products have the characteristics of heat radiation, cold resistance, acid and alkali resistance, corrosive gas and waterproof. The cable structure is soft, the radiation is convenient, the electrical performance is stable under the high temperature (Gao Han) environment, the anti-aging performance is outstanding, and the service life is long. Widely used in electrical wiring, metallurgy, power, petrochemical, electronics, automobile manufacturing and other industries.  
Two: product implementation standards

Q/HHTZH001.1

Flame retardant performance test execution GB12666-90 requirements

Three: usage characteristics

1. AC rated voltage: U0/U 0.6/1KV

High working temperature: 180 C

Low ambient temperature: fixed at -60 C

2. the installation temperature of cable installation should not be less than -25 C.

3. the allowable bending radius of the cable: the cable Zui is 10 times smaller than the outer diameter of the cable.

Four: basic models and names



Model

Product name

KGGCopper core silicon rubber insulated silicon rubber sheathed control cable
KGGPCopper core silicon rubber insulation sheath braided shielding control cable
KGG22Copper core silicon rubber insulated silicon rubber sheathed steel tape armored control cable
KGGRCopper core silicon rubber insulation silicone rubber sheath control flexible cable
KGG32Copper core silicon rubber insulated silicon rubber sheathed fine steel wire armored control cable

YGC

Silicone rubber insulated silicone rubber sheathed power cable

YGCR

Silicon rubber insulated silicon rubber sheathed mobile power flexible cable

YGCP

Silicon rubber insulated silicon rubber sheathed copper braided shielded power cable

YGC22

Silicon rubber insulated silicon rubber sheathed steel tape armored power cable

JGG

Silicon rubber insulation silicone rubber sheath installation line

JGGR

Silicone rubber insulated silicone rubber sheathed flexible cord for mobile applications

JGGP

Silicon rubber insulated silicon rubber sheathed copper braided shielding installation line

JHXG

Silicon rubber insulated motor lead wire


Remarks: the flame retardant silicone rubber cable type is pre added with ZR, and the copper wire in conductor conductor can be plated with tin.

Five: code name and meaning


Code name

Code meaning

Y

Serial code (mobile flexible cable)

G

silicon rubber

C

Heavy

Twenty-two

Steel tape armour

P

Copper braided shield

R

Stranded conductor

J

Motor lead wire


Six: main technical indicators

1. finished wire conductor (class R) DC resistance (comply with GB3956 regulations) refer to appendix A Table 1 and table 2.

The insulation resistance is not less than 100M ohm /KM at 2.20 C.

3. the finished cable is subjected to AC 50HZ3.5KV/5min voltage test without breakdown.



Browse:
Return To The Top

分享到: