Welcome to Anhui Tiankang mechanical and Electrical Equipment Co., Ltd!
    Chinese |English |Sitemap|18019899982
15827915948985.jpg

Liquid level pressure transmitter

Capacitive differential pressure transmitter and long distance differential pressure transmitter are
  • Tel:18019899982
  • Fax:0550-7989666
  • Mail:tkjd@tiankang.com
Description

I. Introduction

Capacitive differential pressure transmitter and long distance differential pressure transmitter are new products in differential pressure transmitter. It is widely used in petroleum, chemical, metallurgy, electric power, light industry, building materials, scientific research and other enterprises and institutions to achieve various kinds of fluid pressure measurement. Throttling devices are used to detect liquid, steam and steam, as well as the flow of viscous, precipitated or easily crystallized particles. It can also detect differential pressure, gauge pressure and interface, and also detect the liquid in open container or pressurized container. Body level.

Two, characteristics

1. Small size and light weight. Because its components are few and its structure is simple, and the transformation of differential pressure, displacement and capacitance signal is linked together, the volume is greatly reduced and the weight is reduced.  

2, high accuracy. Because there is no mechanical transmission and friction, and the relative value of capacitance value is relatively large, the accuracy is easy to do.  

3. Good reliability. Due to the small number of movable parts, the measuring unit is a fully enclosed solid structure, the electronic components are screened through strict aging, and the special bead connector is adopted, thus greatly improving the reliability of the transmitter.  

3, the range can be adjusted with a large and positive and negative transfer structure. Range adjustable range is greater than 6:1, zero range external connection can be adjusted.  

4, overload performance is good. Inside the sensor, a concave arc surface overload protection structure with simple structure and reliable performance is adopted.  

5, with adjustable damping device, it can be used for pulsating fluid measurement.

6, transmitter for flameproof and intrinsically safe type used in dedicated circuit, the output of the circuit is less than 30mA.  

7, transmitter can be attached to 100% pointer, LCD LCD, LED digital tube display, on-site reading is very convenient.

8, transmitter uses 4~40mA DC standard current signal output, two-wire system, with load, anti-interference ability.

Three, technical parameters

medium

Liquid, gas and steam

measuring range

0~0.1KPa to 0~40Mpa

Accuracy grade

0.2, 0.1, 0.075

output signal

4~20mA

Power supply

DC24V

Service temperature

-20~80 C

Storage temperature

-20~80 C

relative humidity

0~90%

Protection level

IP65

explosion-proof

DIIBT4, iaIICT6

Four, selection table

EBY3051

Capacitive pressure transmitter


KO

Ordinary type

KB

Explosion proof type


Zero

negative pressure

One

Gauge pressure GP

Two

Differential pressure DP

Three

Absolute pressure AP

Four

Gao Jing differential pressure HP

Five

Micro differential pressure DR

Six

Differential pressure QP

Seven

Liquid level transmitter LT


One

0-0.06~0.3KPa

Two

0-0.25~1.5KPa

Three

0-1.2~10KPa

Four

0-6.0~40.0KPa

Five

0-30.0~180.0KPa

Six

0-160~1000.0KPa

Seven

0-0.4~2.5MPa

Eight

0-1.6~10.0MPa

Nine

0-4.0~25.0MPa

Zero

0-7.0~40.0MPa


Zero

Standard form

One

Single flanges

Two

Flanged flanges (range greater than 6KPa)

Three

Single insert flange type

Four

Double insert flange type (range greater than 6KPa)

Five

One flattened and one inserted flange type (with a range of more than 6KPa).


One

4-20mA output signal

Two

4-20mA output signal +HART protocol

Accessories and material code

Code name

Meaning

M3

Digital LCD display head

E1

Common cable connector

E2

Explosion proof cable connector

B1

Pipe bent bracket

B2

Disk mounted bent bracket

B3

Pipe mounting bracket

D1

The flange side exhaust / drain valve is on the upper side.

D2

Flange side exhaust / drain valve at lower part.

G1

Waist flange

G2

Welded pipe Street

G3

Integrated three valve group

G

Less than 200 degrees centigrade (high temperature silicone oil)

Anticorrosive material

Structural materials

Flange joint

Exhaust / drain valve

Isolation diaphragm

F12

carbon steel

316L

316L

F13

carbon steel

Haste C

Haste C-276

F14

carbon steel

Monel

Monel K-500

F15

carbon steel

316L

tantalum

F22

316L

316L

316L

F23

316L

316L

Haste C-276

F24

316L

316L

Monel K-500

F25

316L

316L

tantalum

F26

316L

316L

Haste B-2

F33

Haste C

Haste C

Haste C-276

F35

Haste C

Haste C

tantalum

F44

Monel

Monel

Monel K-500

F47

Monel

Monel

3YC25

Note: M3 and F22 are standard configurations.



Browse:
Return To The Top

分享到: