Metal tube rotator flowmeter
The metal tube rotator flowmeter is a reference fl
- Tel：18019899982
- Fax：0550-7989666
- Mail：tkjd@tiankang.com
Description
I. Product Overview
The metal tube rotator flowmeter is a reference flow measuring liquid and gas continuously in a closed pipe by variable area measurement principle. The local display and intelligent remote transmission support multiple output protocols, providing users with a wide choice of space. In addition, the instrument adopts advanced 16 bit microprocessor and high quality industrial components, which ensures the good performance of flowmeters in various application places.
The metal tube rotator flowmeter is based on the principle of variable area measurement, which is used to continuously measure the reference flow of liquid and gas in closed pipelines. It can be used to detect the flow rate of liquid, gas and steam, especially for medium flow measurement with low flow rate and small flow rate.
Two. Product application
1. All metal structure, suitable for high temperature, high pressure and strong corrosive medium.
2, can bring data recovery, data is sealed and power failure protection function.
3, suitable for low flow medium flow detection.
4, the range of payment is 10:1, special type 20:1.
5, the requirement for straight section is not high.
6, dual line LCD screen display, with backlight.
7, simultaneous display of instantaneous flow and cumulative flow rate.
Three. Product parameters
| Measuring range | Water: 2.5 ~ 100000L/h |
| Air: 0.07 ~ 3000m /h | |
| Range ratio | 10:1 (DN = 100mm) |
| 5:1 (DN = 100mm) | |
| Accuracy grade | Standard class 1.5, special order up to 1. |
| Working pressure | DN15, DN25, DN40, DN50 ~ 4.0MPa |
| DN80, DN100, DN150 ~ 1.6MPa | |
| Medium temperature | Ordinary type: -40 C ~ 100 C |
| High temperature type: -80 ~ 250 C | |
| It is lined with F46 fluoroplastics: -40 C to +80 C, lined with PFTE-40 ~ +120 C. | |
| Ambient temperature | Pointer type: -40 ~ +65 centigrade. |
| Intelligent: -25 C ~ +65 C | |
| Connection mode | Flange connection, threaded connection, clamp connection |
| Electrical interface | M20 * 1.5 (special requirement to do) |
| Protection level | IP65 |
| Explosion proof grade | Intrinsically safe: ExibIICT4 (with LB987S safety barrier) flameproof: ExdIIBT4 |
| Medium viscosity | DN15 less than 5Mpa.s DN25 to 150 or less than 5Mpa.s |
| Working power supply | 3.6V lithium battery 1 sections, can be used for one year. |
| +24VDC, ripple less than 5% | |
| Measuring tube material | 304 stainless steel 316 stainless steel, 304 or 316L stainless steel lined FTFE or F46 |
| Float material | 304 or 316 (stainless steel); FTFE or F46 |
Four. Product classification
| Gauge specification | Field display type | Remote transmission display type |
| signal output | nothing | 4 ~ 20mA |
| Power supply | No or Li battery | +24VDC |
| Accuracy grade | Level 1.5 | |
| Monitor | Pointer or LCD | |
| Temperature and pressure compensation | nothing | |
| communication interface | nothing | |
| Measuring tube material | Stainless steel, optional lining PTFE | |
| Explosion proof grade | Optional ExibIICT4 | |
| Protection level | IP65 | |
| Instrument access | DN15 ~ DN150 | |
| Installation mode | Flange installation | |
| Medium temperature | < 250 degrees C | |
| ambient temperature | -30 ~ 60 C | |
Browse：
On A：V-cone flowmeter
Next：Vortex Flowmeter
