Shock proof pressure gauge
The YN-Z series of stainless steel shock resistant
- Tel：18019899982
- Fax：0550-7989666
- Mail：tkjd@tiankang.com
Description
1. Overview
The YN-Z series of stainless steel shock resistant pressure gauges are all made of stainless steel. They are more resistant to corrosion than ordinary shock resistant pressure gauges. The main parts are made of OCr18Ni12Mo2Ti material, which is suitable for corrosive gas environment, and can detect the pressure of corrosive medium. It is widely used in the installation of pressure gauges in petroleum, chemical, metallurgical and other industries. It can adapt to severe vibration environment, tolerate pulsating medium and impact load, and has wider uses. The working temperature of all stainless steel shock proof pressure gauge is -25 C ~70 C. The instrument execution standard is Q/320211 DGH01-2003 protection level IP65.
2, stainless steel shock resistant pressure gauge technical parameters
| Model | structural style | Accuracy% | Measurement range MPa |
| Y-60B-Z Y-60TB-Z Y-60ZB-Z Y-60ZQB | Radial boundless Radial band rear edge Axial limitless Axial leading edge | + 2.5 | -0.1 ~ 0; -0.1 ~ 0.06; -0.1 ~ 0.15 -0.1 ~ 0.3; -0.1 ~ 0.5; -0.1 ~ 0.9 -0.1 ~ 1.5; -0.1 ~ 2.4; 0 ~ 0.16; 0 ~ 0.25 0 to 0.4; 0 to 0.6; 0 to 1; 0 to 1.60 to 2.5. 0 to 4; 0 to 6; 0~10; 0~16; 0~25 0~40; 0~60; 0~100 |
| Y-75B-Z Y-75TB-Z Y-75ZB-Z Y-75ZQB-Z | Radial boundless Radial band rear edge Axial limitless Axial leading edge | ||
| Y-100B-Z Y-100TB -Z Y-100ZB-Z Y-100ZQB-Z | Radial boundless Radial band rear edge Axial limitless Axial leading edge | + 1.6 | |
| Y-150B-Z Y-150TB-Z Y-150ZB-Z Y-150ZQB-Z | Radial boundless Radial band rear edge Axial limitless Axial leading edge | ||
| Note: axial can be carried square front as required. | |||
Instrument implementation standard: GB/T1226-2001, Q/320211DGH01-2003
The working temperature of all stainless steel pressure gauge is -40 C ~70 C;
The working temperature of all stainless steel shock proof pressure gauge is -25 C ~70 C.
The vibration frequency of working environment is not greater than 25Hz, and the amplitude is not more than 1mm
Browse：
